manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 402 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 402

8.3.2 Switching Operating Status

P.8-9

8.3 Printer Status

VJ1324E-M-02

(4) Maintenance Mode 2 Display status

Display the maintenance mode 2 menu on Operation panel to use the maintenance mode.
The maintenance mode 2 is completely independent from the normal operation mode and setup menu 
display mode. Switch to the maintenance mode menu display mode, following the steps below.

1.

When the printer is in the operation mode or 
in the setup menu mode, press the [Power] 
key to turn off the printer.

2.

While holding down the [>], [Setting value 
-], and [<] keys on Operation panel 
simultaneously, press the [Power] key.

The system will transit to the maintenance 
mode 2 menu display mode.

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments