MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 101 / 439

3.2.9 Assembling of Scroller Holder L and R P.3-19
3.2 Removing Covers VJ1324E-M-02
3.2.9
Assembling of Scroller Holder L and R
NOTE
Before assembling scroller holder, remove the following part.
•
Scroller holder:
"3.2.8 Removing Scroller Holder (L, R)" p.3-18
1. Mount position adjustment scroller roller shafts R (2 pieces) to the part A shown below of scroller
holder L (or R). Make sure that the parts’ facing direction are the same in the figure below.
2. Place scroller holder roller on scroller roller shafts R.
NOTE
Scroller roller shaft R is easy-to-fall. Do not let the shaft to fall by pressing or slanting it with
a finger.
3. From the other side of scroller holder L (or R), insert scroller roller shaft L (or R) and fix scroller
holder roller set in step 2.
No. Name
1 Scroller roller shaft L
2 Scroller holder L
A
1
2
1
2
No. Name
1 Scroller holder roller
2 Scroller roller shaft R
No. Name
1 Scroller roller shaft L
2 Scroller holder L
1
2