manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 205 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 205

3.7.9 Replacing Y Fitting

P.3-123

3.7 Replacing Carriage Peripherals

VJ1324E-M-02

3.7.9

Replacing Y Fitting

1.

Perform ink drainage operation and drain ink from all the ink path.

2.

Remove Front Cover.

"3.2.4 Removing Front Cover and Replacing Front Cover Holder" p.3-13

3.

"3.2.4 Removing Front Cover and Replacing Front Cover Holder" p.3-13

4.

Remove Top Cover.

"3.2.6 Removing Top Cover" p.3-16

5.

Remove I/H  Cover.

"3.2.1 Removing I/H Cover" p.3-7

6.

Remove Side Cover R.

"3.2.2 Remove Side Cover R" p.3-8

7.

Remove I/H  Cover.

"3.2.1 Removing I/H Cover" p.3-7

8.

Remove Ink tubes ( 3 pieces) from Y Fitting (1 piece) .

9.

Replace Y Fitting(1 piece).

10. To reassemble the unit, reverse the removal procedure.

11. Charge ink.

"5.6 

イ ン ク 充填 メ ニ ュ ー

" p.5-23

No.

Name

1

Y Fitting

2

Ink tube

1

2

2

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments