MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 261

Page: 261 / 439

3.13.7 Replacing Peripheral Devices of VJ Take-Up Unit Motor Assy

P.3-179

3.13 Replacing Take-Up Unit (Option)

VJ1324E-M-02

3.13.7 Replacing Peripheral Devices of VJ Take-Up Unit

Motor Assy

(1) Replacing Drive Roller

Remove take-up scroller.

Remove the flat head screws (2 pieces) retaining drive roller on driving axis C.

3. Remove driving roller.

4. Replace driving roller.

To reassemble the unit, reverse the removal procedure.

(2) Replacing Take-Up Motor Assy

CAUTION

Do not touch motor right after starting up the printer. Otherwise, you may be burned.

NOTE

Remove the following parts before replacing take-up motor Assy.

•

Take-up scroller:

•

Tension arm

：

"3.13.1 Removing Tension Arm" p.3-162

•

Take-up unit

：

"3.13.2 Removing Take-Up Unit" p.3-164

•

Take-up unit cover

：

"3.13.3 Removing Take-Up Unit Cover" p.3-165

•

Board chassis

：

"(1) Removing Board Chassis" p.3-169

Remove the screws (3 pieces) retaining motor mounting plate on the right of inside chassis.

Remove chain from sprocket large.

No.

Name

Driving roller

set screw thin tip M4

Driving axis C

No.

Name

Motor mounting plate

pan-head screw with spring washer and flat washer polished M4

Right of inside chassis

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 261 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: