manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 398 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 398

8.2.3 Operation Panel

P.8-5

8.2 Part Names and Functions

VJ1324E-M-02

6

[Backward

↑

]Key

Media is fed in the reverse direction.

—

[+]Key

—

Changes to the previous item in the 
displayed menu.
.The setting is changed to the 
reverse direction.
.The numeric value is increased 
during numerical input.

7

[Forward

↓

]

Key

Media is fed in the forward direction.

—

[–]Key

―

.Changes to the previous item in the 
displayed setting.
.The setting is changed to the 
forward direction.
.The numeric value is decreased 
during numerical input.

8

[Power]Ke
y

Turns the printer ON and OFF.

Turns the printer ON and OFF.

No.

Name

Normal

Setup menu display

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments