manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 353 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 353

5.10.2 Parameter Update Menu

P.5-67

5.10 Parameter Menu

VJ1324E-M-02

(7) Debug Bit Update

This menu is used to update the debug bit.
The debug bit is used for testing. 

T I P

The debug bit is displayed in binary digits. The setting values and initial values at the time of 
shipping are as follows: 
• At the time of shipping: 00000000
• Initial value: 00000000

NOTE

This menu is not used for maintenance operation. 

When parameter is changed.

[<]key

[>]key

㧰㨑㨎㨡㨓㧮㨕㨠㧦ޓޓޓ㧖㧜㧜㧜㧜㧜㧜㧜

㧼㨍㨞㨍㨙㧞㧦㨁㨜㨍㨐㨍㨠㨑

㧯㨔㨑㨏㨗ޓ㧣㧦㧼㨍㨞㨍㨙㨑㨠㨑㨞

[Enter]

[Enter]

㨁㨜㨐㨍㨠㨑㧤㧦㧰㨑㨎㨡㨓㧮㨕㨠

[Enter]

㧰㨑㨎㨡㨓㧮㨕㨠㧦ޓޓޓ㧜㧖㧜㧜㧜㧜㧜㧜

㧰㨑㨎㨡㨓㧮㨕㨠㧦ޓޓޓ㧜㧜㧖㧜㧜㧜㧜㧜

㧰㨑㨎㨡㨓㧮㨕㨠㧦ޓޓޓ㧜㧜㧜㧖㧜㧜㧜㧜

㧰㨑㨎㨡㨓㧮㨕㨠㧦ޓޓޓ㧜㧜㧜㧜㧖㧜㧜㧜

㧰㨑㨎㨡㨓㧮㨕㨠㧦ޓޓޓ㧜㧜㧜㧜㧜㧖㧜㧜

㧰㨑㨎㨡㨓㧮㨕㨠㧦ޓޓޓ㧜㧜㧜㧜㧜㧜㧖㧜

㧰㨑㨎㨡㨓㧮㨕㨠㧦ޓޓޓ㧜㧜㧜㧜㧜㧜㧜㧖

㨁㨜㨐㨍㨠㨑ޓ㧼㨍㨞㨍㨙㨑㨠㨑㨞㧫

㨁㨜㨐㨍㨠㨑ޓ㧼㨍㨞㨍㨙㨑㨠㨑㨞

[Enter]

After Updating

㨁㨚㨠㨛㨡㨏㨔㨑㨐ޓ㧼㨍㨞㨍㨙

* Debug Bit (Set digit by digit)

Press [Settting/Value] or [Setting/Value] key 
to change the value.

[Enter]

[Cancel]

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments