MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 396 / 439

8.2.2 Rear Section P.8-3
8.2 Part Names and Functions VJ1324E-M-02
8.2.2 Rear Section
Table 8-2 Part Names and Functions of Rear Section
No. Name Function
1 AC inlet Inlet to connect Power cable.
2 Network interface
connector Connector to connect a network interface cable.
3 Roll media holders Holds the roll media.
Includes flanges where roll media is attached, and the levers that
fixes the roll media holders.
4 Media feed slot Insert media from here when feeding media.
5 Ink cartridge slot Install the ink cartridges.
6 Media guide Used for feeding media smoothly when the media is set or printed.
The heater (Pre-heater) to warm media is installed.
7 Waste Fluid Tank Used for collecting waste ink discharged from the printer.
9
8 Waste fluid valve Open and close when discharging the waste fluid from the waste
fluid tank.
It is normally closed.
9 Book holder Quick reference etc can be stored.
Table 8-2 Part Names and Functions of Rear Section (Continued)
No. Name Function