manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 173 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 173

3.6.5 Replacing Lever Sensor

P.3-91

3.6 Replacing CR Driving Section Components

VJ1324E-M-02

3.6.5

Replacing Lever Sensor 

T I P

Replacing Procedure For Maintenance Part:CR_HP Sensor, Lever Sensor.
This part will be referred to as the Lever sensor in this manual.

NOTE

• Lever sensor is fixed with threadlock.
• Apply threadlock to the new lever sensor before installing it.
• Lever sensor relay  Assy  is a stranded wire of Gray, White and blue.

1.

Remove I/H  Cover.

"3.2.1 Removing I/H Cover" p.3-7

2.

Remove Side Cover R.

"3.2.2 Remove Side Cover R" p.3-8

3.

Shift Pressure lever forward (Downward

）

.

4.

Remove lever sensor cable Assy connector from Lever sensor

.

5.

Release the hook retaining lever sensor, then replace lever sensor.

6.

To reassemble unit, reverse the removal procedure.

No.

Name

1

Lever Sensor Cable Assy

2

Lever Sensor

2

1

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments