MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 326 / 439

5.7.5 Head Slant Check Menu P.5-40
5.7 Adjustment Menu VJ1324E-M-02
(2) Printing in
「
Head slant
：
slant2
」
This menu is used to print out a sample printing to check for head slant in the vertical direction.
To perform head slant check, follow the procedure below.
1. The Printer prints out head slant check patterns in the following modes:
• 1 pass, Uni-D
• PF: 360 dpi, CR: 360 dpi
I is printed from the origin side in the order of A to H.
II is printed by CW/CCW from the origin in the order of A, C, E, to G.
T I P
For the details on the following pattern II, refer to "Details of the vertical pattern".
Finish printing
㧭㨐㨖㨡㨟㨠㨙㨑㨚㨠ޓ㧼㨞㨕㨚㨠
㧯㨔㨑㨏㨗㧠㧦㧭㨐㨖㨡㨟㨠㨙㨑㨚㨠
㧭㨐㨖ޓ㧡㧦㧴㨑㨍㨐㧿㨘㨍㨚㨠
㧴㨑㨍㨐ޓ㧿㨘㨍㨚㨠㧦㧿㨘㨍㨚㨠㧝
㧯㨔㨍㨚㨓㨑ޓ㧴㨑㨍㨐ޓ㧳㨍㨜ޓ㧸㨛㨣
[Enter]
[Enter]
[Enter]
Change to PG_LOW
Σ
OO
OO
Print
direction
Τ
㧭
OO
CW
CCW
Head slant (vertical) pattern
Refer to "Details of the pattern"
Appendix
Check with these
joint points
Media
feeding
direction