manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 111 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 111

3.3.3 Replacing  Cover Switch Assy

、

Sensor  Cover L Assy, Sensor Cover R Assy

P.3-29

3.3 Replacing Cover Peripherals

VJ1324E-M-02

(3) Front Cover R side

1.

Remove I/H  Cover.

"3.2.1 Removing I/H Cover" p.3-7

2.

Remove Side Cover R.

"3.2.2 Remove Side Cover R" p.3-8

3.

Remove Cover Switch Assy from Cover R Cable Assy.

4.

Remove  Cover switch Assy from clamps on the path.

5.

Remove the screws retaining the Sensor Cover R Assy.

6.

Pull up sensor cover L Assy till its limit (red arrow 1), and slightly move back down (red arrow 2).

7.

Pull forward (red arrow 3) and remove sensor cover L Assy.

No.

Name

1

Connection position

1

1

2

No.

Name

1

Sensor  Cover R Assy

2

Tapping screw M3

×

6S Tight cup 

No.

Name

1

Sensor  Cover R Assy

1

2

3

1

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments