manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 79 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 79

2.3 Troubleshooting Without Error Messages

VJ1324E-M-02

2.3.7 Other Problems

P.2-65

2.3.7

Other Problems

Table 2-12  Symptoms, Check Items, and Actions 

No.

Symptoms

Check Item

Action

Reference

1

Machine hangs up.

1.

Internal process of MAIN board  Assy  may be abnormal.

Initialize parameters and reenter or modify them.

"4.3 Working with MUTOH Service 

Assistance Software" p.4-4

2.

MAIN board  Assy  may be damaged.

Replace MAIN board  Assy .

"3.4.4 Replacing MAIN Board 

Assy" p.3-42

2

Machine power is shut off 
during printing.

1.

Is power cable shorted?

Check by a circuit tester.

―

2.

Is there any electric leakage?

Check for short to chassis ground due to damaged 
cable insulation.

―

3.

Check power supply voltage (AC100V).

Replace power board  Assy . 

"3.4.10 Replacing Power Board 

Assy" p.3-50

4.

Check power supply voltage (DC5V).

3

Ink cartridge cannot be 
inserted.

1.

Is the needle of frame  Assy  deformed or damaged?

Replace frame  Assy  needle. 

"3.9.1 Replacing Cartridge Holder 

Assy" p.3-146

2.

Is ink NOT sensor (black resin lever switch) of ink sensor  Assy  
damaged?

Replace ink sensor  Assy . 

4

Ink spills out of waste fluid 
tank.

1.

Check if the waste fluid tank is full.

Replace waste fluid tank.

‐

2.

Check presence of ink cartridge from "Sen.: Ink NOT" of self-
diagnosis function.

Remove all cartridges and lightly push the switch of 
ink NOT sensor (K, C, M, Y) with something with a 
flat tip such as ballpoint pen to check that the display 
of "Sen: Ink NOT" changes.

"5.5.4 Sensor Menu" p.5-12

3.

Is waste fluid tube coming out of flushing box bent?

Reinstall it.

"3.8 Replacing Maintenance 

Section" p.3-138

5

Ink spills out of flushing 
box.

1.

Is flushing box clogged with dust? 

• Remove dust.
• Replace flushing box  Assy . 

2.

Is waste fluid tube coming out of flushing box bent?

Reinstall waste fluid tube.

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments