MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 124

Page: 124 / 439

3.4.4 Replacing MAIN Board Assy

P.3-42

3.4 Replacing Board Base

VJ1324E-M-02

3.4.4

Replacing MAIN Board Assy

CAUTION

When handling boards, do NOT touch the elements on the boards.
Elements may be destroyed by static electricity.

NOTE

• MSA

（

MUTOH Service Assistance

）

corresponding to VJ1324 is needed for replacing

MAIN Board Assy.

（

Refer to

"4.3 Working with MUTOH Service Assistance

Software" p.4-4

）

Remove Paper Guide R2.

"3.2.7 Removing Paper Guide R2" p.3-17

Remove connector Panel.

"3.4.1 Removing Connector Panel" p.3-37

Remove MAIN Board Bracket.

"3.4.3 Removing MAIN Board Bracket" p.3-39

Remove SODIMM.

"3.4.5 Replacing SODIMM" p.3-43

NOTE

Make sure NOT to lose the removed SODIMM. It will be mounted on MAIN board to be
newly installed.

Remove the screws (6 pieces) retaining MAIN board Assy to MAIN board bracket.

Replace MAIN Board Assy.

To reassemble unit, reverse the removal procedure.

Perform various adjustment.

"4.2 Adjustment Item" p.4-2

No.

Name

MAIN Board Assy

Cup screw M3

MAIN Board Bracket

Summary of Contents for ValueJet VJ-1324
















































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1324

Reviews:

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 124 / 439

Search results

Summary of Contents for ValueJet VJ-1324

Reviews: