manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 211 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 211

3.7.13 Replacing Photometer JUNCTION Board Assy

P.3-129

3.7 Replacing Carriage Peripherals

VJ1324E-M-02

10. Remove the screws (2 pieces) retaining Bracket.

11. Replace Photometer JUNCTION Board Assy.

NOTE

Dedicated Jig is needed to assemble Photometer JUNCTION board Assy.

12. Set dedicated Jig on mounting position, and set Photometer  JUNCTION board Assy.

NOTE

Install the jig before (temporarily) fixing Bracket with screws.
If installed after (temporarily) fixing Bracket with screws, it may damage Platen.

13. Make sure that there are no gaps between Bracket and the jig and the jig and Platen.

No.

Name

1

Pan-head screw with spring washer and flat washerM3

×

8

2

Bracket

2

1

No.

Name

1

Photometer  JUNCTION board Assy

2

Dedicated Jig

2

1

Make sure that there are no gaps 
between Bracket and the jig and 
the jig and Platen.

Make sure that there are no 
gaps between Bracket and 
the jig and the jig and Platen.

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments