manualshive.com logo in svg

MUTOH ValueJet VJ-1324, Maintenance Manual, Page: 190 / 439

Share
Download
MUTOH ValueJet VJ-1324 Maintenance Manual Download Page 190

3.7.6 Replacing Print Head

P.3-108

3.7 Replacing Carriage Peripherals

VJ1324E-M-02

13. Remove Head cover from the hooks (2 pieces on both sides).

14. Remove Solenoid Head Assy from Print Head.

15. Replace Print head. 

CAUTION

Be careful not to damage Head board, Head nozzles, and Head FFC connector.

16. Install Solenoid Head.

17. Install Head cover.

18. Install Head FFC.

NOTE

Make sure to insert Head FFC fully.

19. Put Print head back to the fixing position of Head mounting plate.

NOTE

Do not screw on Print head at this point.

20. Install Connector Solenoid Head Assy.

No.

Name

1

Head cover

2

Hook of  Print head

No.

Name

1

Solenoid Head Assy

2

Print head

 2 

1 

1 

 2 

Pinch this part with 
longnose pliers, etc, and 
pull it out at once.

No.

Name

1

Head board

2

FFC connector

3

Head nozzles

1 

 2 

 3 

Summary of Contents for ValueJet VJ-1324
























































































































































































































































































































































































































































Reviews:

No comments