Mitsubishi Electric E70 Series, Instruction Manual

Page: 131 / 782

2 Monitor Screens
MITSUBISHI CNC
I - 106
During a single block stop or when a program error stop occurs, the buffer can be corrected with the following operations,
and operation can be continued.
The normally executed program appears in the buffer correction area.
Menus
Menu Details Type Reference
This closes the pop-up window and quits this function. C
Operation method
(1) Press the main menu [Prg correct]. The buffer correction mode is entered.
The display changes so that the next command is at the head
of the area. The buffer correction area becomes the valid area,
and the keys can be input or the cursor moved.
The cursor can be moved freely within the buffer correction
area using the cursor keys.
(2)
Correct the program with the same method as a
normal program editing.
(3) Press the [INPUT] key.
The buffer correction mode ends, and the corrected data is
written into program.
If a program error has occurred, the error display is erased.
(4)
Confirm that the corrected data is correct, and then
restart. The program execution resumes from the currently stopped
position.
Close
N121 G28 X10.Y10.;
N122 T1212;
N123 S1230 M3;
N124 G00 X68. Z201.;
N125 G01 X80. Z195. F50;
N126 Z150.;
N127 G02 X100. Z185. R20;
←
Previous command
←
Command in execution
←
Next command and
subsequent commands
N121 G28 X10.Y10.;
N122 T1212;
N124 G00 X68. Z201.;
N125 G01 X80. Z195. F50;
N126 Z150.;
N127 G02 X100. Z185. R20;
N 123 S1230 M3;
←
Next
command
and
subsequent
commands