Mitsubishi Electric E70 Series, Instruction Manual

Page: 350 / 782

E70 Series Instruction Manual
5.8 Data Sampling Screen
I - 325
(2) PLC device designation methods
Designate "/" at the head and then designate the PLC device name.
If a word device is used, the size designation is required subsequently. Bit designation is also possible.
The designation methods are as listed below.
The format of output data follows the setting of output type (0: decimal / 1: hexadecimal).
The number of output digits for a word device of hexadecimal output varies depending on the size designation (S: 4
digits, D: 8 digits, or Q: 16 digits).
Ex. 1) When a bit device is designated
Ex. 2) When a word device is designated
Designation method Description
/PLC device name Only for bit device. 1 bit data is output.
/PLC device name, size
Only for word device.
Designate S, D, or Q for size.
S: Single Word: 2 byte (16 bit) data is output.
D: Double Word: 4 byte (32 bit) data is output.
Q: Quad Word: 8 byte (64 bit) data is output.
/PLC device name, size, bit
Only for word device.
Designate bit number 0 to 63 (decimal).
Designated bit is output to the position of bit 0.
PLC device value
X800 0
YC2D 1
Address designation
Output result
Output type
0 (Decimal) 1 (Hexadecimal)
/X800 0 00000000
/YC2D 1 00000001
PLC device value
R7500 0x86A0
R7501 0x0001
R7502 0X0D40
R7503 0X0003
Address designation
Output result
Output type
0 (Decimal) 1 (Hexadecimal)
/R7500,S 34464 86A0
/R7500,D 100000 000186A0
/R7500,Q 858993459300000 00030D40000186A0
/R7500,S,10 1 0001
/R7500,D,20 0 00000000
/R7500,Q,49 1 0000000000000001