E70 Series Instruction Manual
3.2 Tool Compensation Amount
I - 135
(Ex.) Tool compensation data [+INPUT]
(2) Erasing the Tool Compensation Data
Operation method ("-2.000" is calculated and set in the X-axis tool nose wear compensation amount for offset No.
(102).)
(a)
Use the same procedure as (1) above to move the
cursor to the offset No. 1 X-axis length wear position.
(b)
Enter a value.
The input value is added to the original value and displays.
-2.000 [+INPUT]
[Ex.] 18.000 displays if the original value is 20.000. (20.000 -
2.000 = 18.000)
Operation method (Erasing one line of tool compensation data at the cursor position)
(a)
Move the cursor to the line to be erased with the
[
↑
],[
↓
],
and
keys.
The cursor appears at the data item of the selected offset No.
(b)
Press the [Line clear] and [INPUT]menu.
The menu keys are highlighted and a message displays
confirming whether it is okay to erase.
The background color of the data to be erased displays in light
blue.
(c)
Press the [Y ] or [INPUT] key.
The selected line of data (one line amount) is cleared to zero.
To cancel the erasing, press a key other than [Y] or
[INPUT].
The data erased to zero displays at the top of the
compensation data.
20.000
Old
New
X-axis tool nose
wear offset amount
+ INPUT
-2.000
ً
ۂ
Summary of Contents for E70 Series
