4 Edit Screens
MITSUBISHI CNC
I - 248
(Note 1) When changing the display range while the 2-plane display mode such as [XY/XZ], the display range (scale
and display position) for the upper and lower areas changes in the same manner.The operation method is the
same as the 1-plane display mode.
The white-framed display range in the upper and lower areas simultaneously move to the left/right when the [
Left ], [ Right ] keys are pressed.
The white-framed display range of either upper or lower areas moves up and down when the [ Up ] , [ Down ]
keys are pressed.
Which frame to be moved up/down can be changed with the page key.
(Note 2) The set displayed position will be held even after the power is turned OFF and ON again.
Operation method (Changing the drawing display position)
(1)
Press the menu [Display range] .
A white frame indicating the display range appears on the
screen.The display range input mode is activated, and the
following menu appears.
(2)
Press the [ Up] , [Down] , [ Left] , [ Right] menu or
cursor movement keys keys [
↑
], [
↓
], [
←
], [
→
].
The cursor (
□
) indicating the center of the display and the
frame line move up, down, left and right according to the key
operations.
(3)
Press the [ INPUT] key.
The display position changes so that the cursor position (
□
)
is the center of the area.By changing the display position, the
graphic data displayed on the screen is erased, however, the
scale value is not changed.
Zoom
in
Zoom
out
Up Down Left Right
Center-
ing
Summary of Contents for E70 Series
