Mitsubishi Electric E70 Series, Instruction Manual

Page: 373 / 782

6 Maintenance Screens
MITSUBISHI CNC
I - 348
6.2.2 Selecting a Device, Directory and File
[Device select] menu's submenus
[Dir] (other than memory) and [File name] menu submenus
File selection sequence
Designate the device where the target file is
located.
→
Select from the sub menu.
↓
Designate the directory with a full path.
→
Input the full path or select from the list.
↓
Designate the file name.
→
Input the file name or select from the list.
Menu used
Menu Details Type Reference
This selects the NC memory (program, parameter, PLC program, NC
data).
C
This selects the RS-232C device (PC, tape, etc.). C
This selects the front IC card. C
This selects the Ethernet-connected host computer. C
This selects USB memory. C
Menu Details Type Reference
The cursor appears in the list display. The list contents can be selected
with the [INPUT] key.When a directory is selected, the contents of the
selected directory are displayed in the list. Continued selection is
possible.When a file name is selected, the file name is temporarily
displayed in the input area. When the [INPUT] key is pressed again, it is
fixed.
A
Memory
Serial
Memory
card
Ethernet
USB
Memory
From
list