Mitsubishi Electric E70 Series, Instruction Manual

Page: 50 / 782

E70 Series Instruction Manual
1.9 Guidance Function
I - 25
If the [?] key is pressed on any screen, the alarm guidance window will open. If a pop-up window other than the alarm
guidance window is open, the alarm guidance window will open over the currently opened pop-up window. In this case,
the menu state does not change. If [?] key or [CANCEL] key is pressed again when the guidance window is open, the
guidance window will close and the screen will return to the previous state in which the [?] key was pressed.
(Note 1) The alarm guidance is executed for the alarm that is occurred when the [?] key has been pressed. Therefore,
the guidance will be displayed continually even if the alarm is reset while the alarm guidance is displayed. The
alarm guidance is not executed for the alarm that has occurred while the alarm guidance is displayed.
(Note 2) If the [?] key is pressed when an alarm is not occurring, the operation/parameter guidance appears. In this
state, if the "alarm" tag is selected with the right frame key, nothing is displayed in the message, details and
remedy columns. (These columns are blank.)
(Note 3) All the explanations of the alarm having the same error class and No. are displayed in the details column.
Operation method
Displaying the alarm guidance
(1)
Press the [?] key during occurring alarm on
operation screen.
The guidance window is opened while "alarm" tag is valid. The
alarm details and remedy are displayed for "H/W stroke end
axis exists".
(Ex.) When "H/W stroke end axis exists" and another
alarm occur.