Mitsubishi Electric E70 Series, Instruction Manual

Page: 764 / 782

E70 Series Instruction Manual
IV - 231
【 #9717 】 Host 1 Wrd pos: size
Set the size display position (nth word from left) of the list displayed when the ftp command "dir" is
executed.
(Note) One word designates a character string divided by one or more spaces.
---Setting range---
0 to 100
0: Default value
【
#9718
】
Host 1 Wrd pos: Dir
Set the <DIR> display position (nth word from left) of the list displayed when the ftp command "dir" is
executed.
(Note) One word designates a character string divided by one or more spaces.
---Setting range---
0 to 100
0: Default value
【
#9719
】
Host 1 Wrd pos: cmnt
Set the comment (date, time, etc.) display position (nth word from left) of the list displayed when the
ftp command "dir" is executed.
(Note) One word designates a character string divided by one or more spaces.
---Setting range---
0 to 100
0: Default value
【
#9720
】
Host 1 Wrd num: cmnt
Set the number of words to be displayed as a comment.
(Note) One word designates a character string divided by one or more spaces.
---Setting range---
0 to 100
0: Default value
【
#9721
】
Host 1 no total siz
Set whether to display the total number of characters registered in the machining programs of host1
when displaying the file list.
If there are many files in the directory to be referred to, the list can be updated quickly by setting "1".
0: Display
1: Not display
【
#9731
】
Host2 host name
Set the host computer name.
This parameter allows the NC to easily recognize the host computer on the network. Set the host
computer's name (name registered in C:\windows\hosts) or the IP address.
<Setting example>
For host name: mspc160
For IP address: 150.40.0.111
(Note) Set the host computer's TCP/IP address if communication is not carried out correctly.
---Setting range---
15 characters (alphanumeric) or less
【 #9732 】 Host2 user name
Set the user name when logging into the host computer.
---Setting range---
15 characters (alphanumeric) or less