E70 Series Instruction Manual
6.7 Servo Diagnosis Screen
I - 407
Menus
Menu
Details
Type
Reference
Displays the servo unit diagnosis information in the data display area.
B
Displays the spindle unit diagnosis information in the data display area.
(Note) When the parameter "#1039 spinno" is set to "0", this menu will not
be displayed.
B
Switches the display between the DA output and the spindle PLG
diagnosis information.
Pressing this button again this menu is highlighted, the display switches to
the DA output.
(Note 1) When the parameter "#1039 spinno" is set to "0", this menu will
not be displayed.
(Note 2) Even when the parameter "#1039 spinno" is set to other than "0",
this menu will be grayed out and cannot be selected while displaying the
servo unit diagnosis information.
B
Currently not supported and cannot be used.
A
Currently not supported and cannot be used.
A
Clears the all values of "AL cause cnt accu" and "freq" of the axis where
the cursor is placed to 0.
A
Displays the data of four axes from the next axis. This menu is displayed
only when there are five or more servo axes or spindle.
C
Servo
unit
Spindle
unit
PLG
diagn
All
num clr
Alarm
num clr
All
cnt clr
Next Ax
Summary of Contents for E70 Series
