Mitsubishi Electric E70 Series, Instruction Manual

Page: 299 / 782

4 Edit Screens
MITSUBISHI CNC
I - 274
4.4.6 Changing a File Name (Rename)
This section explains the method used to change the file name.
Refer to "4.5.2 Selecting a Device, Directory, and File" for details of the device, directory, and file specification method.
(Note 1) Make sure the original and new devices are the same.
(Note 2) If the file to be renamed is running or program restarting, an error will occur, and the name will not be changed.
(Note 3) If the file to be renamed is being edited in the custom screen, the operation message "Can't rename
designated file" appears and may not be changed.
(Note 4) If a file that does not exist is designated for the original file, or if an existing file name is designated for the new
file selection, an error occurs, and the name is not changed.
(Note 5) The directory where the file in operation search/check search is stored cannot be renamed. The operation
message "Can't rename designated file" appears.
(1) Changing a file name
(1)
Use the [ ← ] or [ | ← ] key to select file setting
column A.
(2)
Designate the device, directory and file name before
the change.
The designated file appears in file setting column A.
(3)
Use the [
→
] or [
→
| ] key to select file setting
column B.
(4)
Designate the device, directory, and file name after
the change.
The designated file appears in file setting column B.
(5)
Press the[Rename A
→
B] menu.
(6) Press the [Y] or [INPUT] key.
Renaming of the file starts.A message appears when the
renaming is completed.