E70 Series Instruction Manual
6.2 Input/Output Screen
I - 375
6.2.13 Sharing Machining Data
Machining data can be send to/received from Anshin-net server in the call center.
(Note 1) Neither HD operation nor memory card operation can be performed during file transmission from HD.
(Note 2) Only one file can be saved on Anshin-net server. The file previously exists on the Anshin-net server is
overwritten.
(Note 3) Anshin-net icon appears in the upper middle of the screen during Anshin-net communications.
(Note 4) When Anshin-net server is specified as device name, the directory button is displayed in gray and cannot be
selected.
Operation method
(1)
Use the menu [Area change] to select file setting
column A.
(2)
Designate the transfer source device, directory and
file name.
The designated file appears.
(3)
Use the menu [Area change] to select file setting
column B.
(4)
Press the menu [Anshin net] to designate the
transfer destination device and file name.
"Anshin-net server" is displayed as device name.The file
name, unless specified, is as same as the name of the
originally transferred file.Only numbers within 10 characters
can be used for a file name.
(5)
Press the menu [Transfr A
→
B] .
A message appears to confirm the transmission of machining
data.
(6)
Press the [Y] or [INPUT] key.
Transmission of machining data starts.A message appears
upon the completion of transmission.
Summary of Contents for E70 Series
