background image

nLight ECLYPSE Enclosure

912-00023-001

Page 1

Acuity Brands | One Lithonia Way  Conyers, GA  30012   Phone: 800.535.2465    www.acuitycontrols.com     ©  2017 Acuity Brands Lighting, Inc.  All rights reserved.   06/21/17    

Always read complete installation instructions prior to installation!

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INSTRUCTIONS!

SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION 

All servicing should be performed by qualified service personnel.

When using electrical equipment, basic safety precautions should always be followed including the 

following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
Do not use outdoors.
Do not mount near gas or electric heaters.
Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by 
unauthorized personnel.
The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
Do not use this equipment for other than intended use.
SAVE THESE INSTRUCTIONS.

Remove internal assembly prior to drilling/punching additional or larger holes for conduits, and 

remove excess metal shavings and contaminants prior to powering the panel

!

Acuity Controls assumes no responsibility for claims arising out of improper or careless installation or handling of this product.  Failure to follow any of 

these instructions could void product warranty.

For a complete listing of product Terms and Conditions, please visit www.AcuityControls.com

!

!

Summary of Contents for nLight ECLYPSE






Reviews: