background image

IP150-EP00 07/2019

PARADOX.COM

IP150 Internet Module

Web Programming Guide

V4.40 and higher

Introduction

The IP150 Internet Module is a multi-function Internet communication module that offers 
SWAN connectivity or static IP address connectivity. It is fully configurable from the 
integrated web interface. The IP150 provides freedom to access your system and receive 
push or email notifications (depending on configuration) from anywhere around the world.

Connecting via IP150 Internet Module

In order to connect to your IP150, you will need the following information:

IP address and port

Panel Master Code

To connect with your system from an external computer: 

1) Open a web browser (e.g., Google Chrome).
2) In the address bar, enter IP address and Port number or open IP exploring tools and 

double-click on the IP device you wish to connect to.

3) Log in using your panel master code.

Receiver Configuration Screen

The Receiver Configuration Screen allows you to configure your module for IP 
Reporting through a DNS.

System Information Screen

The system information screen contains important hardware and software information on both 
your security system, your IP150 module, and PCS module if present. The PCS module 
section is only visible if a PCS module is detected.

I/O Configuration Screen

The I/O Configuration screen provides the I/O terminals that can be configured via the IP150 
web page. Each I/O can be defined as either an Input or an Output. The I/O terminals can 
ONLY be defined from the IP150 web interface. They are independent from the panel and can-
not be related to any panel event. An Output can only be triggered from within the IP150’s web 
interface. Output or Input triggering can allow you to have email notifications sent to selected 
recipients. 

When defined as an Input or Output, they can be configured as normally open or as normally 
closed. However, for the Output, a 12V source must be supplied. Outputs are rated at 50mA. 
The method of activation is either Toggle or Pulse. If set to Toggle, a Delay Before Activation 
can be defined. If set to Pulse, a Delay Before Activation and Duration can be defined. Refer 
to the installation manual for input and output connections.

IP150 Configuration Screen

The IP150 Configuration screen allows you to configure your IP150 Internet Module’s settings.

IP150 and PCS module 
status information is 
displayed. 

Enter a DNS with a DNS 
or DDNS provider. Also, 
enter your DNS in the 
section WAN1, WAN2. An 
IP address must be pro-
grammed into the report-
ing section of the control 
panel for the Domain 
Name field to be accessi-
ble and functional.

Receiver Status

Domain Name for IP 
Reporting

1

1

2

2

1

Through SWAN, access to your system, push notifications and emails is possible using the Insite 
Gold application. If the IP150 is connected to a server using a static IP address, the DHCP protocol 
is not necessary. Click “No” and configure the IP150 manually.

Module Configuration

1

Reviews: