Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 458 / 498

A13
9
14
AF
12
-2
0
Tro
u
blesho
o
ting Cal
ibr
a
tio
n a
n
d Result
E
rro
rs
Comm
on Er
ro
r Me
ss
ages
and
C
o
rr
ec
tiv
e
Act
ion
s
0x03350010
2
MC Obstruction
Detection Transducer
Failure CAU: MC Obstruction Detection
Transducer Failure
Message ID: 0x03350010
Subsystem: ppsdSmc
MC Obstruction detection hardware
failure. • Consistent failures may indicate issues with the
MC Obstruction Detection Transducer.
• Contact Beckman Coulter Support Center for
additional information.
0x03880006
3
CC Reaction Carousel
Temperature Out of
Range CAU: cc rwHtr reaction wheel
temp out of range
Message ID: 0x03880006
Subsystem: cc rwHtr
This error occurs under the following
conditions:
• When the reaction wheel monitor
sensor readings fall outside of the
+37°C ± 1.0°C specification.
• When the reaction wheel control
sensor readings fall outside of the
+37°C ± 0.1°C specification.
• Check System Status for Reaction Carousel
Temperature. Refer to
Temperatures .
• Check Cuvette Status for a cuvette flagged in
red. This may indicate broken or cracked
cuvette. Refer to
Cuvette Water Blank Status .
• If a cuvette appears to be damaged, replace it
(extra cuvettes available in Spares kit and may
be ordered).
• Press the STOP button and Home the system.
0x03EA0009
4
Instrument Detected
Power Loss CAU: Instrument Detected
Power Loss
Message ID: 0x03EA0009
The instrument detected an interruption
in or loss of the AC input voltage • If prompted, select Shutdown.
• When the console indicates the shutdown is
complete, turn off the main power switch on the
instrument and the computer.
• Verify the instrument power connections.
• Restart the computer and turn the instrument
back on.
• If the instrument fails to power on or the
problem continues after the instrument has
been rebooted, contact Beckman Coulter
Support Center for additional information.
Table 12.10 Error Messages and Corrective Actions (Continued)
ID
Class #
Pop-up Event Log Description Corrective Action