Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 448 / 498

A13
9
14
AF
12
-1
0
Tro
u
blesho
o
ting Cal
ibr
a
tio
n a
n
d Result
E
rro
rs
Comm
on Er
ro
r Me
ss
ages
and
C
o
rr
ec
tiv
e
Act
ion
s
0x02620018
2
CC Reagent Delivery
Subsystem Motion
Error, Pausing CAU: CC Reagent Delivery
Subsystem Motion Error,
Pausing
Message ID: 0x02620018
Subsystem: RaSched
This occurs after 2 motion errors on the
Reagent Delivery Subsystem.
The CC side of the system is placed into
Pausing then Stopped state.
• When the instrument goes to Stopped state,
check for possible interference with the motion
of the reagent probes, reagent mixer or reagent
syringe drive.
• Make sure the reagent drip tray is installed
properly.
• Make sure the reaction carousel evaporation
cover is installed properly.
• Check the reagent syringe to make sure the
plunger is seated correctly.
• Press the DxC STOP button. Wait for the motors
to release power (about 30 seconds, listen for
the sound of the Smart Modules resetting) then
Home the system.
• While the system Homes, check for possible
interference issues.
• If the system Homes successfully, restart the
run and check the reagent probes and mixer for
possible interferences (e.g., improper cable
routing or not in alignment).
Table 12.10 Error Messages and Corrective Actions (Continued)
ID
Class #
Pop-up Event Log Description Corrective Action