Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 466 / 498

A13
9
14
AF
12
-2
8
Tro
u
blesho
o
ting Cal
ibr
a
tio
n a
n
d Result
E
rro
rs
Comm
on Er
ro
r Me
ss
ages
and
C
o
rr
ec
tiv
e
Act
ion
s
0x05DC0200
4
CC Subsystem Error CAU: Homing Error for CC
Subsystem
Message ID: 0x05DC0200
Subsystem: boot , homing
command
This is a generic homing error that
occurs whenever there is an issue with
the CC Subsystem. This will normally be
the second error or will be preceded by a
more definite error.
The parameter for the event log entry
will either show "InitPhotometer" if the
error occurred during an RA Results
subsystem SpinReactionWheel
command or will show "HomeRA" if this
error occurred while the RA Subsystem
was performing a startup home and
Prime.
• Press the STOP button and Home the system.
• If the error continues, check Event Log for
specific subsystem errors.
• Contact Beckman Coulter Support Center for
additional information.
0x05DC0201
4
CC Reaction Carousel
Subsystem Error CAU: Homing Error for CC
Reaction Carousel Subsystem
Message ID: 0x05DC0201
Subsystem: boot, homing
command
An error occurred while homing the
cuvette wash station or reaction
carousel.
Check the Event Log (classes 2
and 4) for specific reaction carousel or
cuvette wash station related errors.
• Make sure the cuvette wash head is installed
properly. Refer to
Replace Cuvette Wiper to view
wash head.
• Press the DxC STOP button. Wait for the motors
to release power (about 30 seconds, listen for
the sound of the Smart Modules resetting) then
Home the system.
• If the error continues after homing, contact
Beckman Coulter Support Center for additional
information.
Table 12.10 Error Messages and Corrective Actions (Continued)
ID
Class #
Pop-up Event Log Description Corrective Action