Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 366 / 498

A13914AF
10-2
System Status and Commands
Status-Cycle Count
What to Do If There is an Error
If any of the monitored areas show a
Warning
or
Error
status, select the tab for that area. This shows
each parameter for the monitored area and indicates the specific parameter that is out of limits.
Return to Status Summary
When viewing the detailed status information, it is possible to return to the Status Summary by
selecting the
Summary
tab.
Status-Cycle Count
Introduction
The Status-Cycle Count provides an approximation of an instrument's usage. This information can
be useful for estimating maintenance frequencies or anticipating component failure. Cycle counts
may be periodically collected by Beckman Coulter using the instrument modem.
Show Cycle Count
1
Select
Status
from the menu bar.
2
Select the
Count
tab. A summary of the monitored areas appears.
Table 10.1 Status Messages
Status Description
Error Parameters which exceed allowable limits are called errors. If any of the parameters
in a monitored area exceed the allowable limit,
Error appears with a red highlight.
Warning Parameters which are out of recommended limits but still within allowable limits are
called Warnings. If any of the parameters in a monitored area are out of
recommended limits but still within allowable limits and there are no other
parameters that are in a error condition,
Warning is shown with a yellow highlight.
Not all parameters have both a recommended range and an allowable range.
OK If all of the parameters are within limits, OK is shown.