Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 204 / 498

A13914AF
6-14
Sample Programming and Processing
Clear Samples
Procedure for Clearing Samples
1
Select
Samples
from the menu bar.
2
Select
Clear F7
.
3
Sample may be cleared by Sample ID(s), Rack/Position, or by Date/Time created. Type the
specific criteria for deletion.
IMPORTANT
Clearing Rack/Position does not clear programming for sample(s) programmed in those
positions with associated Sample IDs. Sample must still be cleared by Sample ID. However, clearing
by Sample ID does clear rack/position in which the Sample ID was located.
4
Select
OK
to continue clearing. A confirmation screen appears.
OR
Select
Cancel
to retain sample programs.
Deletion Criteria Procedure for Sample Clearing
Sample ID • Type the Sample ID(s) to be cleared. Single and
multiple IDs may be cleared. Use a comma (,) to
separate a list of IDs.
Range of Sample IDs
(Refer to Range of Sample IDs
in this chapter for additional
information.)
•
Type the first Sample ID in the
From
field.
• Type the last Sample ID in the To field.
Time/Date Programs Created • Type the time and date range of samples to clear.
Rack/Position(s)
•
Type the Rack/Position(s) to be cleared. Single
and multiple racks may be entered.
—
If only Rack is entered, programming in all
positions in that rack is cleared.