Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 443 / 498

A13
9
14
AF
12-
5
T
roubl
es
hoo
tin
g
C
a
libr
a
ti
on and
Res
u
lt
E
rr
o
rs
Co
m
m
o
n
Er
ro
r Me
ss
a
g
e
s a
n
d C
o
rr
e
ct
ive
A
ct
io
n
s
12
0x01FA0016
4
Primary vacuum level is
low. CAU: Primary vacuum is low
Message ID:
0x01FA0016
This error occurs when the Primary
vacuum drops below 18 in Hg for more
than 15 seconds. There is no vacuum
level adjustment now and cannot be set. • Check vacuum levels and Home the system.
• Make sure No Foam is present, replace if
necessary. Refer to
Load/Unload Modular
Chemistries (MC) .
•
Make sure caps on pressurized bottles are tight.
• Make sure Vacuum Accumulator canister in the
rear of the Hydro is empty.
• Contact Beckman Coulter Support Center for
additional information.
0x01FA0019
4
10 psi Air Supply
Pressure Is Low. CAU: 10 psi Air Pressure Is Low
Message ID: 0x01FA0019
This error occurs when the transducer
line #129 is outputting a value into the
Hydro Board that is below the 10 psi
specification. • Check pressure levels and Home the system.
• Adjust pressure levels if necessary as follows:
— Adjust pressure in Main system above 17
psi.
— Adjust the high pressure system to 17 psi.
— Adjust the low pressure system. The
pressure range for the low pressure system
is 8–11 psi. Set it at 10 psi.
• Contact Beckman Coulter Support Center for
additional information.
Table 12.10 Error Messages and Corrective Actions (Continued)
ID
Class #
Pop-up Event Log Description Corrective Action