Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 105 / 498

A13914AF
3-7
System Setup Options
Configuring the Chemistry Menu
3
3
Remove calibrator assignments. To clear calibrator bar code ID and/or rack and position:
•
Select
Assign F7
.
• Select
Next
or
Prev
to locate the calibrator of interest.
OR
• Select the
Calibrator Name
pull-down menu at the top of the
Assign Barcode/Rack
dialog box
to view the List of Calibrators.
• To clear the fields select the
Calibrator ID, Rack
and
Position
fields for each level of calibrator
and press
(
Delete
)
on the keyboard.
•
Select
Close
to exit and save information.
4
Remove the reagent cartridge. To remove the reagent cartridge DIGN:
• Select the position for the chemistry to be removed.
•
Select
Load F1
.
•
When prompted by the instrument to remove the reagent cartridge, open the reagent
carousel door to remove the cartridge. The reagent cartridge may be scanned off if it has a
bar code or select
Clear F1
to remove reagent data.
•
Close the reagent carousel door.
Remove the Chemistry from Sample Programming (Example: DIGN)
IMPORTANT
All samples in the "sample required," "incomplete" and "rerun" status need to be cleared
before the chemistry can be deleted. Samples in the "in progress" or "removed" status should be allowed
to proceed to "complete" or "incomplete" status.
1
Request sample load lists for:
•
Sample Required
• Incomplete
and
•
Rerun
2
Select
Samples
from the menu bar.
3
Select
List F9
.
4
Select the
Status
field pull-down menu at the bottom of the
Load List
dialog box to view the List
of Sample Status.
5
Select
Sample Required
for a list of samples.