Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 477 / 498

A13
9
14
AF
12
-3
9
T
roubl
es
hoo
tin
g
C
a
libr
a
ti
on and
Res
u
lt
E
rr
o
rs
Co
m
m
o
n
Er
ro
r Me
ss
a
g
e
s a
n
d C
o
rr
e
ct
ive
A
ct
io
n
s
12
0x13A50026
6
Host Communication
Line Down, Check
Event Log HC: Host line down A problem sending data out the host port
has been encountered. Generated once
and not again until the condition is
cleared. Will continue to retry. • Check the LIS for status.
• Check cable connections.
•
Check the host setup parameters have not been
changed. Refer to
Host Communications , Setup .
0x13A50097
6
Host Communication
Line Down, Check
Event Log. No new
messages will be sent.
Review Host Comm
Setup to re-enable. HC: Chronic Host Port
Communications Error
Communications between the console
and the host has been disrupted for a
prolonged period of time. Check to see
that the Host is operating and
responding to messages sent by the
console. Check the cable is correctly
attached. • Check the LIS for status.
• Go to Host Communications , Setup . Exiting
screen will force the system to reestablish
communication.
• Check cable connections.
• Make sure the host setup parameters have not
been changed.Refer to
Host Communications ,
Setup .
0x13A70004
7
Instrument not in
proper state. ICMD: System Error. Cannot
HOME
CAU:
restart may be required
File:
filename
Line: line number
System is not in proper state for Homing
(usually still Stopping). Must be
Standby/
Stopped/Disabled/PVT/Diag/Maint or
Align
• Wait for the system to get to Standby/Stopped/
Disabled/PVT/Diag/Maint or Align .
•
Reboot if necessary. Refer to Shutdown .
0x13A70005
7
Instrument not in
proper state.
or
Unable to send Home
message.
ICMD: Cannot HOME in current
state.
File: filename
Line: line number
The instrument is not in the proper state
for Homing (usually still Stopping). All
sides of the instrument must be in
Standby , Stopped , Disabled, PVT , Diag ,
Maint or Align .
• Wait for the system to go to a Standby , Stopped ,
Disabled, PVT , Diag , Maint or Align state.
• Select Instr Cmd and Home .
• If problem continues, reboot the DxC system.
Refer to
Shutdown .
0x13A70006
7
Instrument not in
proper state. ICMD: Cannot PAUSE in current
state
File: filename
Line:
line number
The instrument is not in the proper state
to accept a PAUSE command. Only
select PAUSE when not already in a
Pausing state and at least one side of the
instrument is running.
• If Pause was previously selected, the System will
go to
Standby automatically.
•
Select Pause only when at least one side of the
system is running.
•
Reboot if necessary. Refer to Shutdown .
Table 12.10 Error Messages and Corrective Actions (Continued)
ID
Class #
Pop-up Event Log Description Corrective Action