Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 376 / 498

A13914AF
10-12
System Status and Commands
Shutdown
Shutdown
Introduction
Shutdown is used to place the system into a state where it is safe to reset or turn power off. System
files are closed to prevent data corruption.
IMPORTANT
When you perform a shutdown, it is very important to read and follow the instructions on the
screens. Do not turn the console off until " Shutdown: It is now safe to reboot your computer " appears on
the monitor. If power is turned off before this, there is a potential for data corruption.
Additional Information
For additional information about preparing the system to remain in a powered-off condition for an
extended period, refer to the Extended Shutdown procedure in the UniCel DxC Synchron Clinical
Systems
Reference Manual .
Shutdown
1
Verify that the system is in
Standby
or
Stopped
.
2
Select
Instr Cmd
from the menu bar.
3
Select
4 Shutdown
.
4
Select
OK
. The Shutdown in Progress screen appears with the message "Please wait for further
instructions. DO NOT TURN THE POWER OFF."
The system status goes to
Shutdown
.
5
From the
Select Reboot or Shutdown
dialog box, select the appropriate option:
•
Reboot
to return the system to an operational state. The system automatically reboots and
returns to the
Main
screen.
OR
•
Shutdown
to prepare the system to have the power turned off. A counter appears while the
system shuts down. When " Shutdown: It is now safe to reboot your computer " appears in the
top, left corner of the screen:
—
Turn off the console power: press and hold the power button until the light goes out.
—
Turn the instrument main power switch (1) behind the far right door to the OFF (O)
position. Refer to
Figure 10.1 .