Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 377 / 498

A13914AF
10-13
System Status and Commands
Shutdown
10
6
To restore power, refer to System Power On/Boot .
ON/OFF Switch
The circuit breaker/power ON/OFF (O/|) switch is located behind the front right-hand door of the
instrument.
Figure 10.1 ON/OFF (O/|) Switch
Line Converter Device
All power to the instrument is passed through the line converter device located in the lower right
compartment of the instrument. The line converter serves as a conditioner to limit the effect of line
voltage changes that could damage the sensitive electronic components of the system.
DC Output Power Supplies
Power is routed to redundant DC output power supplies which provide 24V or 36V power for
distribution throughout the system. By using redundant power supplies, not all are used at any one
particular time. Should one fail, the operator is alerted, but may continue operation unaffected.
Uninterruptible Power Supply (UPS)
The computer console requires an additional power source. The UPS plugs into a standard 110-120V
AC, 50/60 Hz power source. The UPS in turn supplies power to the computer console and the
1. Main Power ON/OFF (O/|)Switch
A016487P.EPS
1