Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 45 / 498

A13914AF
1-9
System Description
Sample Handling System
1
Autoloader/Offload Track
When viewed from the front of the system, the autoloader is on the left and holds up to 25 sample
racks in preparation for presentation to the DxC 800 system. The DxC 600 system has room to load
a maximum of 14 racks. Refer to
Figure 1.3 .
There is also space for 25 sample racks in the offload track as they are removed from the Sample
Carousel upon completion.
IMPORTANT
When loading racks onto the autoloader, make sure that they are placed firmly down into the
autoloader.
Figure 1.3 Sample Loading Area
Priority Load Position
Between the Autoloader and the Sample Gate is the Priority Load position. This position is used in
conjunction with the PRIORITY LOAD button when a rack is to be loaded onto the Sample Carousel
into a
reserved priority position
so that it can be run in a higher priority than other racks on the
Autoloader. Refer to Figure 1.3 .
1. Pushers
2. Run Button
3. Priority Load Button
4. Autoloader
5. Shuttle
6. Offload Track
7. Stop Button
A011870P.EPS
2 3 7 6 4 5
1