Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 111 / 498

A13914AF
3-13
System Setup Options
Setting the Default Sample Type
3
Setting the Default Sample Type
Introduction
Default Sample Type allows for definition of the default sample type for all programmed samples.
The sample type may be changed for individual samples while in the sample programming function.
Setup
To set the default sample type, select
2 Chemistry Configuration/Sample Type
from the
Setup
screen.
Select the
Default Sample Type
pull-down menu at the top of the screen.
Date/Time Setup
Introduction
The Date/Time option allows the user to set the date and time, select the date/time formats that
appear on all screens and reports, and restore date and time defaults.
The first time the instrument is powered up, the user must set the date and time. When set, changes
to accommodate situations such as converting to daylight-savings time are performed through this
option. The
Date/Time
screen may be viewed at any time, but may only be modified when the system
status is
Standby
,
Stopped, Startup, Instrument Down, or Homing
.
Setup
To access Date/Time setup, from the
Setup
screen select
3 Date/Time
. Then press
Date F1
or
Time F2
respectively to change the date and/or time formats for the system. Or you can press the
Restore F3
key to restore the default display format.
Default Date Display Formats:
•
Order:
mm dd yy
•
Day Format:
Leading Zero (01)
•
Month Format:
Leading Zero (01)
•
Year Format:
1996 (four digit year)
•
Separator:
/
Default Time Display Formats:
•
Time Format:
24 hour
•
Hour Format:
Leading Zero (01)
•
Separator:
: