Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 464 / 498

A13
9
14
AF
12
-2
6
Tro
u
blesho
o
ting Cal
ibr
a
tio
n a
n
d Result
E
rro
rs
Comm
on Er
ro
r Me
ss
ages
and
C
o
rr
ec
tiv
e
Act
ion
s
0x05DC0096
4
Smart Module
Download Failed. Smart
Module ID: sm id CAU: Boot Task - SM Download
Failed
Message ID: 0x05DC0096
Subsystem: boot
SM ID: sm id
Smart module communication error • Press the DxC STOP button. Wait for the motors
to release power (about 30 seconds, listen for
the sound of the Smart Modules resetting) then
Home the system.
• If the error continues after homing, Shutdown
the instrument and reboot.
• If the problem continues after the instrument
has been shutdown, contact Beckman Coulter
Support Center for additional information.
0x05DC01F8
4
CC Reagent Mixer
Motion Error CAU: Homing Error for CC
Reagent Mixer
Message ID: 0x05DC01F8
Subsystem: boot , homing
command
This error occurs when there is a motion
error with the Reagent Mixer, either
Rotary or Vertical. The parameter in the
event log entry will show one of the
following:
• "AttachRgtMixer" – error occurred
attaching to smart module 0xC1.
• "RecoverRgtMixer",
"EnergizeRgtMixerVer",
"RaiseRgtMixer" – error occurred
during a vertical movement
toward
the home sensor flag.
• "HomeRgtMixerVer" – error occurred
during a vertical movement
away
from the home sensor flag.
• "EnergizeRgtMixerCrn",
"MoveRgtMixerToSensor" – error
occurred during a horizontal
movement
toward the hardware
sensor.
• "HomeRgtMixerCrane" – error
occurred during a horizontal
movement.
• Raise canopy and check for obvious obstruction
of the CC reagent mixer.
• Press the STOP button and Home the system.
While system is homing, observe motion of the
CC reagent mixer. The mixer should complete
its operations in a smooth manner.
• If the error continues, check the event log to
determine the specific subsystem error.
• Perform the appropriate vertical or horizontal
CC reagent mixer alignment.
• Contact Beckman Coulter Support Center for
additional information.
Table 12.10 Error Messages and Corrective Actions (Continued)
ID
Class #
Pop-up Event Log Description Corrective Action