Beckman Coulter UniCel DxC 600, Instructions For Use Manual

Page: 453 / 498

A13
9
14
AF
12
-1
5
T
roubl
es
hoo
tin
g
C
a
libr
a
ti
on and
Res
u
lt
E
rr
o
rs
Co
m
m
o
n
Er
ro
r Me
ss
a
g
e
s a
n
d C
o
rr
e
ct
ive
A
ct
io
n
s
12
0x02620025
2
CC Sample Syringe
Motion Error CAU: CC Sample Syringe
Motion Error
Message ID:
0x02620025
Subsystem: RASched
Action Name: action name
This error occurs when there is an error
within the Sample Syringe Subsystem.
This includes both the Shear valve Motor
and the Lead Screw Motor. • Make sure syringe and plunger are properly
seated at top and base of syringe.
• Check for obstruction of syringe movement.
•
Perform CC Syringe Home Alignment.
• If the error continues, contact Beckman Coulter
Support Center for additional information.
0x02620033
4
10 Cuvettes Have failed
Water Blank CAU: 10 Cuvettes Have Failed
Water Blank
Message ID: 0x02620033
Subsystem: RaSched
This error can be flagged for the
following:
• A cuvette's wavelength absorbance
is over 350 mA (Absorbance) for all
wavelengths between 340 to 700
nanometers.
• A cuvette's wavelength absorbance
is over 200 mA (Absorbance) for the
940 nanometer wavelength (PRO
System only).
• PSM Error.
• LPIA Failure.
• Remove wash station head and inspect probes
for blockage and wiper for wear. Refer to
Replace Cuvette Wiper for removal of Wash
Station.
• Check wash station wiper alignment.
• Check wash station alignment.
• Remove reaction carousel and check cuvette
cleanliness.
Non-resolution of problem may indicate photometer
issues. Contact Beckman Coulter Support Center for
additional information.
0x02620034
4
CC Reagent probe
disabled due to level
sense errors CAU: CC Reagent Probe
Disabled Due To level Sense
Errors
Message ID:
0x02620034
Subsystem:
RASched
Probe: probe
Multiple reagent cartridges have level
sense errors. • Home the system.
•
Check reagent cartridges for bubbles.
•
Perform Reagent Probe to Cartridge and
Reagent Probe Height in Cartridge Alignments.
Refer to step 3 of the
Replace the Old Probe
procedure.
Table 12.10 Error Messages and Corrective Actions (Continued)
ID
Class #
Pop-up Event Log Description Corrective Action