EZZ023536
10/16
SA-07 Load Share Switch Time
Sets the time to switch slave Load Share between enabled and disabled. You can prevent
sudden changes in the output frequency by switching Load Share between enabled and
disabled at the time set with SA-07. Increase the setting value when oscillation occurs in the
motor.
SA-09 Load Share on level1
Sets start level 1 for slave Load Share. This parameter enables slave Load Share when the
absolute value of the master or slave torque signal (torque/current) is greater than start
level 1. Set this parameter to 0.0% to keep slave Load Share constantly enabled.
This parameter is set as a percentage of motor rated torque.
No.
Name
Setting Range
Default Setting
SA-09
Load Share on level1
0.0% to 100.0%
0.0%
Figure 3.7 Switching Load Share between Enabled and Disabled
No.
Name
Setting Range
Default Setting
SA-07
Load Share Switch Time
0.0 s to 5.0 s
0.1 s
Torque/current
Start level 1 (SA-09)
Absolute value of master or slave torque signal
(torque/current)
Load Share
Disabled
Enabled
Disabled
Содержание CR700
