YASKAWA
SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
109
A - Drive front
B - LED status ring board
C - Temporary placement holes
Figure 2.114 Remove the LED Status Ring Board
A - Drive front
B - LED status ring board
C - Temporary placement holes
Figure 2.115 Remove the LED Status Ring Board
2.
Refer to the figure and wire the control circuit.
WARNING!
Fire Hazard. Tighten all terminal screws to the correct tightening torque. Connections that are too loose or
too tight can cause incorrect operation and damage to the drive. Incorrect connections can also cause death or
serious injury from fire.
Note:
•Use shielded, twisted-pair wires and ground the shield to the ground terminal of the drive. Incorrect equipment grounding
can cause drive or equipment malfunction from electrical interference.
•Do not use control circuit wiring that is longer than 50 m (164 ft) to supply the analog frequency reference from a remote
source. If the control circuit wiring is too long, it can cause unsatisfactory system performance.
Содержание CR700
