354
YASKAWA
SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
Code
Name
Causes
Possible Solutions
oFC06
Option Card Error Occurred at
Option Port (CN5-C)
A fault occurred in the option.
1. De-energize the drive.
2. Make sure that the option is correctly connected to the
connector.
3. Re-energize the drive. If the problem continues, replace the
option.
You re-energized the drive when:
•
There is an encoder option installed the drive
•
The drive main circuit power supply is energized
•
There is an external 24 V power supply
connected to terminals PS-AC.
1. De-energize the drive main circuit power supply and the
external 24 V power supply to terminals PS-AC.
2. After the keypad display goes out, energize the drive main
circuit power supply again.
3. Supply the external 24 V power to terminals PS-AC.
When you use an encoder, de-energize the drive main circuit
power supply.
Note:
Do a Fault Reset to clear the fault.
Code
Name
Causes
Possible Solutions
oFC10
Option RAM Error
A fault occurred in the option card.
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Note:
Do a Fault Reset to clear the fault.
Code
Name
Causes
Possible Solutions
oFC11
Option Ope Mode Error
A fault occurred in the option card.
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Note:
Do a Fault Reset to clear the fault.
Code
Name
Causes
Possible Solutions
oFC12
Drive Receive CRC Error
A fault occurred in the option card.
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Note:
Do a Fault Reset to clear the fault.
Code
Name
Causes
Possible Solutions
oFC13
Drive Receive Frame Error
A fault occurred in the option card.
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Note:
Do a Fault Reset to clear the fault.
Code
Name
Causes
Possible Solutions
oFC14
Drive Receive Abort Error
A fault occurred in the option card.
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Note:
Do a Fault Reset to clear the fault.
Code
Name
Causes
Possible Solutions
oFC15
Option Receive CRC Error
A fault occurred in the option card.
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Note:
Do a Fault Reset to clear the fault.
Code
Name
Causes
Possible Solutions
oFC16
Option Receive Frame Error
A fault occurred in the option card.
1. De-energize the drive.
2. Make sure that the option card is correctly connected to the
connector.
3. If the problem continues, replace the option card.
Note:
Do a Fault Reset to clear the fault.
Содержание CR700
