YASKAWA CR700, Техническое руководство, Страница: 867 / 886

EZZ023535
32 / 35
No.
(Hex.)
Name Description
Default Setting
(Range)
Ref.
SA-65
(1AD6)
Expert
Twigger Sw Type
Selects N.O. and/or N.C. for the inputs of the
Master and Slave Trigger switches.
0: Both NO
1: Master NO Slave NC
2: Master NC Slave NO
3: Both NC
0
(0 - 3)
21
SA-66
(1AD7)
Expert
Align Fault Sel
Sets the operation when an Alignment fault is
detected. An Alignment fault is detected when
the interval between Master Trigger and Slave
Trigger inputs exceeds the setting value of
SA-67.
0: Disabled
1: Ignore First Trigger
2: Fault
0
(0 - 2)
22
SA-67
(1AD8)
Expert
Max Align Dist
Sets the maximum distance between Master
Trigger and Slave Trigger as the number of
revolutions of the slave motor. AF (Alignment
fault) is detected when this distance is
surpassed.
1000 rev
(1 - 5000 rev)
24
SA-68
(1AD9)
RUN
Expert
Max Align Speed
Sets the maximum Alignment speed.
Alignment processing will not be performed
when the motor is running at the speed of the
setting value or greater. Use this parameter to
restrict Alignment processing at high speeds
where accuracy decreases.
Setting this parameter to 0.0 Hz disables the
function.
0.0 Hz
(0.0 - 400.0 Hz)
24
SA-69
(1ADA)
RUN
Expert
Align Trg Window
Sets the judgment condition of U9-23 (Window
Counts) when SA-61=4.
U9-23 is incremented when the Alignment error
exceeds the setting value of SA-69 during
Alignment. The monitor value is decremented
when the Alignment error is the setting value of
SA-69 or lower.
2.00 rev
(0.00 - 100.00 rev)
24
SA-70
(1ADB)
RUN
Expert
Align Trig Count
Sets the count to trigger Alignment when
SA-61=4. When U9-23 is the setting value of
SA-70, Alignment will operate, and then U9-23
will be cleared.
3 times
(1 - 100 times)
24
SA-71
(1ADC)
Expert
Repeat Trig Sel
Selects how to process the trigger when the
Master and Slave Trigger counts do not match.
0: Last Trigger
1: First Trigger
0
(0, 1)
25