2.9 Change the Drive Enclosure Type
52
YASKAWA
SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
A - Back hooks
B - Front hooks
C - Back side of top protective cover
D - Drive front side
E - Mark
F - Temporary placement holes
Figure 2.33 Install the Top Protective Cover
■
Install the Conduit Bracket
Remove the keypad, connector, and front cover before you do these steps.
1.
Remove the screws that install the protective covers to the drive.
A - Screws
Figure 2.34 Remove the Screws that Install the Protective Cover
2.
Remove the knock-out holes on the UL Type 1 base before you install the kit.
Refer to
Remove the Knock-Out Holes on page 51
for more information.
3.
Align the screw holes of the UL Type 1 base with the screw holes on the drive and safety the UL Type 1
base to the drive with the screws.
Tighten the screws to a correct tightening torque:
• 0.98 N
∙
m to 1.33 N
∙
m (8.67 lbf
∙
in to 11.77 lbf
∙
in)
A - UL Type 1 base
B - Knock-out holes
C - Screw holes
Figure 2.35 Install the UL Type 1 Base
Содержание CR700
