YASKAWA CR700, Техническое руководство, Страница: 158 / 886

3.4 Keypad Operation
158 YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
1.
Push [Home] to show the HOME screen.
Note:
•The keypad will [Home] in the top right corner when the HOME screen is active.
•If [Home] is not shown on
, push [Back] to show [Home] on .
2.
Push [Menu].
3.
Push or to select [Monitors], then push .
4.
Push or to select [Trend Plot], then push .
The screen will show the monitors as shown in this figure.
Note:
Push [Hold] to switch between Pause and Restart for the monitor display. The “ Hold (ENTER) ” message flashes while you pause
monitoring.
◆
Change Parameter Setting Values
This example shows how to change the setting value for
C1-01 [Acceleration Time 1]
. Do the steps in this
procedure to set parameters for the application.
1.
Push (Home) to show the HOME screen.
Note:
•When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
•If [Home] is not shown above the
, push (Back).
2.
Push (Menu).