T-Mobile Ameo, User Manual

Page: 67 / 246

67 Using Phone Features
3.9 Setting Up Bluetooth SIM Access for Car Kit
Phones
Bluetooth car kits that support the SIM Access Profile (SAP) can connect to
your Ameo and access its SIM card via Bluetooth. Once a SAP connection has
been established, you can download SIM contacts from your Ameo to the car kit
phone. You can also use the car kit phone to answer and make calls using your
Ameo’s SIM card.
Notes

To enable downloading contacts onto the car kit, ensure that all contacts on the
Ameo are stored in the SIM card and not in the Ameo memory. Configure the
car kit to download contacts only from the SIM card.

Contact T-Mobile to find out which car kit phone models are compatible with
your Ameo.
1. On your Ameo, make sure that Bluetooth is turned on and set to visible
mode. For information about turning on Bluetooth and enabling visible
mode, see “Bluetooth modes” in Chapter 6.
2. Tap Start > Programs > SAPSettings .
3. On the BT Remote SIM Access screen, select the Remote SIM Access check
box then tap Done .
4. Connect the car kit phone to your Ameo via Bluetooth. To learn how to
connect, consult your car kit phone’s manual.
5. If this is the first time you are pairing the car kit phone with your Ameo, enter
the car kit’s passcode on your Ameo.
6. A pop-up message should appear on your Ameo saying that a connection
has been established between your Ameo and car kit phone. Tap
OK
.
7. On the BT Remote SIM Access screen, tap Done .
Note You will not be able to make/receive calls, send/receive messages or perform
related activities on your Ameo when the SIM Access Profile connection is active.
You’ll be able to do all these from the car kit phone during this time. After the
connection is disconnected, you will be able to use your Ameo as before.