KLIC-N-KUT KNK Force User Manual Download Page 42

Page: 42 / 401

Material

Color(s) Tested

Blade

Type

CD /

Other Comments

Vinyl - Intermediate Cal - with the mat

Oracal 651 - see
Comments

Scraps on the KNK Mat. Colors tested: White,
Orange, Lt Green, Dark Green, Royal Blue,
Black

Vinyl - Intermediate Cal- no mat - direct
from the roll

Oracal 651 - see
Comments

Direct from a roll. Colors tested: White, Orange,
Lt Green, Dark Green, Royal Blue, Black

Vinyl - Metal Fx

Contact, silver

Vinyl - Premium

Oracal 951

Vinyl - Printable - on the mat

White

Vinyl - Printable - w/o the mat

White

Vinyl - Wall - on the mat

Oracal 631 -
Green, Blue

Vinyl - Wall - on the mat

Oracal 631 -
Brown

Vinyl - Wall - w/o the mat

Oracal 631 -
Brown

Vinyl - Wall - w/o the mat

Oracal 631 -
Yellow

Cut intricate design very clean.

Wax Paper

0.5

Wood Veneer - 0.015"

Oak, Walnut

1.5

250

PS = 10; Used 5 passes so that a higher speed
could be used

[1]

Summary of Contents for KNK Force


















































































































































































































































































































































































































Search results

Summary of Contents for KNK Force

Reviews:

Related manuals for KNK Force

Brands by name

Popular brands

KLIC-N-KUT KNK Force, User Manual

Search results

Summary of Contents for KNK Force

Reviews:

Related manuals for KNK Force

Brands by name

Popular brands