361
12.07 Using the Punch Tool
•
can be used for creating decorative designs (such as pergamano and other
parchment arts) or for creating small holes for paper embroidery.
•
To protect the mat and the thin punch, it is recommended that a thick soft material be used as a cushion
between the paper/cardstock and the cutting mat. Suggested materials that work well include
, craft foam, and rhinestone rubber. Press the soft material to the mat and place tape on the outside
edges to protect it. Also, use a low
Plunge Speed
(20 or lower) to help protect the delicate tip
•
If you are planning to punch and cut using the dual head function on the Force, you will need to use a
surface material suitable for cutting so that it can have a repositionable adhesive applied. In this case, the
shelf liner would work best.
•
Unlike with the other accessory tools, set the Z origin based on the top of the soft surface versus the top of
the material being punched.
•
To design a punch pattern, refer to
Section 10.10
.
Summary of Contents for KNK Force
Page 306: ...306...
