KLIC-N-KUT KNK Force, User Manual

Page: 251 / 401

251

Depth: Adds the actual 3D effect by increasing the extension of the extrusion:

Use Perspective provides a vanishing point effect:


Remove Foreground:
o
With this option off, when you separate the shape from the extrusion, you see that the extrusion is
filled beneath the original. In other words, in a paper piecing or layered vinyl project, the original
shape would need to be aligned over the top of the 3D extrusion:
o
With Remove Foreground checked, the original shape will be cut away from the extrusion. This
would be the typical choice when layering HTV where some types cannot be pressed on top of each
other (such as glitter HTV):

Color: Clicking on the colored box to the right of Color will allow you to select the color of your choice
for the extrusion.

Outline Only: If you prefer the extrusion not have a Fill color, select this option. The outline color will be
that of the Color you selected in the 3D Extrude window:
X Offset = 0.35
Y Offset = 0.35
Depth = 0.25
X Offset = 0.35
Y Offset = 0.35
Depth = 0.5
X Offset = -0.35
Y Offset = -0.35
Depth = 0.25
X Offset = -0.35
Y Offset =-0.35
Depth = 0.5
Use Perspective : Off Use Perspective : On Use Perspective : Off Use Perspective : On